Description

Features:

• Adjust the Voltage Ramp In / Out time correct & eliminate fuel pressure spikes
• Single Or Dual Input/ Output Versions
• 4 models available for complete coverage
• LED to visually monitor the status Of your powerMAX Boost-Adevice
• New Enables 0-5V or Optional Internal Boost
• Works on all vehicles
• Domestics & Imports
• Compatible with all 12V or 16V battery systems
• Plug & Play Versions
• Simple installation

Since 2010, PowerMAX has set the standard for Boost-Adevices. PowerMAX combines the best of two worlds into one productClean continuous voltage & the highest available amperage. PowerMAX Version 2 offers single or dual outputs along with multiple new features.

SIMPLE INSTALLATION:

• Choose the Plug & Play version or splice into your existing fuel pump, ignition system, intercooler pump or cooling fan via included installation kit.

CASE / ENCLOSURE:

• Industrial Black Heatsink With four mounting tabs.

DIMENSIONS:

• LENGTH: 47/8″
• WIDTH: 3 7/8′
• HEIGHT: 27/16″

Overview:

• High performance Digital Voltage Booster-Regulator
• Available with either Single or Dual Inputs & Outputs
• Trigger boosted output voltage via Ground Or 0-5V sensor
• Optional Trigger via adjustable Internal Boost Sensor

Output:

Continuous Output Rating: 31 AMPS @
peak Output Rating: 38 @ (60 seconds)

Input:
Input voltage: 9.5V -19V DC
Input Fuse: 80 AMPS (dual) or 40 AMPS (single)

Maximum Voltage output For each Model:
FuelMAX: 22V or 18V (dual range adjustable Output)
SparkMAX: 25V (adjustable output)
SparkMAX Race: 31 V (adjustable output)
InterC001MAX:16V (continuous output)
FanMAX: 15V (continuous output)
COMPATIBILITY:

• Compatible with all 12V or 16V battery
• systems (9.5Vto 19V)

LOWEST VOLTAGE DROP:
When PowerMax is not boosting output voltagethe voltage drop across the unit is only: 0.05V
USER ADJUSTABLE OUTPUT VOLTAGE:

• Adjust the output voltage via the knobs on the front panel,
• Use the dip switches to save the voltage setting.
• Optional remote mounted voltage control knob overrides
• saved voltage setting and can be adjusted from the drivers seat.
• Adjustment range: 14.5V
• 100% = 18V,22V, 25V or 31V (output model specific)

Status LED:

• Anytime the unit has power, the green LED will glow continuously.
• When boosting the output voltage, the green LED will flash slowly.
• While the output voltage is being adjusted via the front panel the green LED will flash quickly.
• After the front panel voltage values have been saved, the green LED will twinkle.

Adjustable Voltage Ramp-In / Ramp Out Model Specific:

• Three different ways to Ramp-in and Ramp-out boosted voltage.
• Ramp-in the boosted voltage over time (Ground, or 0-5V trigger).
• Externally adjustable via dip switch settings.
• Time Settings: O, 0.25, 0.50 and 0.75 seconds
• Ramp in the boosted voltage based on the 0-5VVoltage Trigger,
• Externally adjustable via dip switch settings.
• Range Settings: 0V, 0.5V,1.0V and 1.5V
• Use the optional internal boost sensor to ramp in the boosted
• voltage based on manifold boost pressure (psi).
• Externally adjustable via dip switch settings.
• Range Settings: OV, 4psi, 8psi and 12psi

Installation Kit Included:

• Enable Wire harness, adapter fitting (1/8th NPT to barb)
• Hobbs switch preset @ 5psi (user adjustable 3-7psi), solder
• heat shrink ring terminals, heat shrink wire splices, tie straps
• self-tapping screws, vacuum line, 1/4″ to 3/1 6″ vacuum tee
• 3/16″ vacuum tee, 3/16 to 3/8″ vacuum tee and 30 amp mini-fuse.

Note: The installation kit is specific to each PowerMAX model

Fitment

Brand: JMS
UPC: 021201230287

• 2015-2017 Ford F-150

Document

Instruction

Video